|
Title: fuel Post by: huski on April 20, 2009, 08,16:51 AM i am about to do the hcr and was wondering if my 08 wr 250 huski will do 100 kms on one tank. Anyone got same bike or had one and know approx distance per tank of fuel .
thanks Aaron Title: Re: fuel Post by: gigerchild on May 07, 2009, 07,46:29 AM Hi
I have a 06 Wr 250. I have never put it to the test some blokes in the US on thumpertalk where saying 60 miles (110km). My bike way way rich from the factory fouling plugs. After taking it back to the dealer torque power ballarat I was told it was fine, then to Jaydees in gisborne to be jetted richer WTF???? I jetted it my self and found the float level was rich 4mm+. I changed my slide to a #4 had a 3 fitted but the hand book says #4 fitted?? I run the following jetting and a FMF gnarly pipe Main 390 Pilot 27.5 Needle J8-6DJ8-60 ON 3RD CLIP Slide #4 Air screw 2 turns out Ps You remove the baffle in your ADR pipe and by cutting it open ripping out the baffle and re welding, and then you will have a spare full power pipe! LL Title: Re: fuel Post by: gigerchild on May 07, 2009, 08,36:02 AM For Husk TMX carb float level is 18-22mm The link below is shows you how to set float level with photos!! I found this very helpful. You have to register first....FFracing http://ffracing.proboards106.com/index.cgi?board=faded&action=display&thread=1159226893 For those interested LL |