|
Title: NEED NEW BEARINGS Post by: Ron H on July 21, 2011, 06,48:14 AM needed new bearings shops shut just print your own http://www.youtube.com/watch?v=u7h09dTVkdw
Title: Re: NEED NEW BEARINGS Post by: Serge C on July 21, 2011, 09,20:03 AM WOW! :o Title: Re: NEED NEW BEARINGS Post by: Ian Robinson on July 21, 2011, 10,55:08 AM Saw a similar email a while back. They made a fully functioning shifter spanner.
Title: Re: NEED NEW BEARINGS Post by: rosco74 on July 23, 2011, 03,16:44 PM Been around for a while now. Dandenong TAFE engineering department has one, and they have made a shifter also. Sits in there display cabinet in the foyer. If you want to use the printer, give Graham a call.
Title: Re: NEED NEW BEARINGS Post by: Frankie-boy on July 23, 2011, 10,49:52 PM Will it print out a new 2012 Kato 300 ;D
Title: Re: NEED NEW BEARINGS Post by: Btoan on July 24, 2011, 04,20:31 AM Been around for a while now. Dandenong TAFE engineering department has one, and they have made a shifter also. Sits in there display cabinet in the foyer. If you want to use the printer, give Graham a call. Do you mean Graham Smith? If so I will ask him why he has not told me about it. Title: Re: NEED NEW BEARINGS Post by: rosco74 on July 25, 2011, 12,57:48 PM I don't know of any other Graham there, that's him.
As to why he never told you about it, I couldn't say. The original staff that purchased the printer are no longer there, they left years ago, he now is in charge of it apparantly. They have had it for some time. I went to Jeff's shed a long time ago at an expo with the college and suggested to the staff they buy it. They did. Since then the staff I had a relationship with have left. Graham is now in charge of it/lumped with it, not sure how he feels about it. Anyway, it's there. I was able to use it for quite a few projects at no charge initially, but I believe that has changed now. Title: Re: NEED NEW BEARINGS Post by: Btoan on July 26, 2011, 05,31:05 AM I don't know of any other Graham there, that's him. As to why he never told you about it, I couldn't say. The original staff that purchased the printer are no longer there, they left years ago, he now is in charge of it apparantly. They have had it for some time. I went to Jeff's shed a long time ago at an expo with the college and suggested to the staff they buy it. They did. Since then the staff I had a relationship with have left. Graham is now in charge of it/lumped with it, not sure how he feels about it. Anyway, it's there. I was able to use it for quite a few projects at no charge initially, but I believe that has changed now. I was at a party with Graham and a lot of the old staff from the Engineering Dept of Dandy TAFE last week. I worked there for 9 1/2 years. |