|
Title: Yamaha WR450F triple clamps Post by: flipper on July 22, 2011, 12,21:39 AM Triple clamps from a 2007 WR450F (alloy frame model).
These clamps are in excellent condition but have been modified slightly in the steering stops to allow them to be used on a steel-framed WR450 (about 2mm of alloy was removed from the steering stops - see photos). The stem bearings are in good nick, and the clamps come with removable taper bar mounts. One bolt is missing from the upper clamp where it holds the fork leg. The glad-wrap is there to keep the bearings clean. Would suit someone wanting to put late model forks and newer style headlight into a steel-framed WR450. Located in the Yarra Valley or will post at buyer's expense. Price is $80 - Please send me a PM if interested. (http://home.exetel.com.au/karramar/Triple_Clamp_2007_WR450_1.jpg) (http://home.exetel.com.au/karramar/Triple_Clamp_2007_WR450_2.jpg) (http://home.exetel.com.au/karramar/Triple_Clamp_2007_WR450_3.jpg) Title: Re: Yamaha WR450F triple clamps Post by: Zeb Colic on July 22, 2011, 08,41:55 AM Hey flipper when is the new YZ gunna hit the dirt she must be ready to go... ;D
Title: Re: Yamaha WR450F triple clamps Post by: flipper on July 22, 2011, 11,40:56 AM Getting close :)
I actually took it out for it first proper run today, and couldn't be happier with how the wide-ratio transmission has slotted in. And I've just finished wiring up the lights off the new stator tonight, fired it up and yay, they work! I've got a whole swag of stuff due to arrive in the post next week, so once that gets here I should be ready to roll. |